.506" 600 Grain Flat Point Gas Check Cast Bullet Mould with Crimp Groove for 505 Gibbs 1-Cavity
$205.00
In stock
Item Number
JIM506600GC
This single cavity gas check cast bullet mould was designed for the 505 Gibbs. Designed to be cast from wheel weight at approximately 700 degrees. The mold will nominally cast .506" in diameter on the driving bands with .560" from the crimp groove to the nose, 1.185" long and a .300" meplat. ***Uses Saeco Handles ***
| .506" 600 Grain Flat Point Gas Check Cast Bullet Mould with Crimp Groove for 505 Gibbs 1-Cavity |
Write Your Own Review