.402" 415 Grain PP 1-Cavity Flat Base Elliptical Two Diameter Cast Bullet Mold

Buffalo Arms Company single cavity paper patch cast bullet mould producing an eliptical nose paper patch bottom pour bullet. Bullet dimensions-1.425" long,.402" base diameter, .393" nose diameter and 415 grain. This is a unique bullet design made especially to use in chambers that are cut for groove diameter bullets. If you look carefully at the dimensions shown in the drawing you will see that the bullet is designed to fit right up to the leade in your chamber and the rest of the bullet is bore diameter or slightly over.

Designed by Arnie Seitz for 1-14.5" or faster twist rates.

***Uses Saeco cast bullet mould handles item number SAE29000***