.368" 270 Grain Gas Check 2-Cavity Bullet Mould
$225.00
Out of stock
Item Number
JIM2368270GC
Please call us (208) 263-6953 if you would like to place this item on back order.
This double cavity mould was designed with the 9.3x62 and 9.3x57 cartridges in mind. 270 grain gas check flat nose bullet with crimp groove. Bullet length is 1.040" long, the length from the bottom of the bullet to the crimp groove is .300" with a meplat of .200" in diameter. Just right for hunting or plinking. This mould is not compatible with Hornady gas checks, Our item # BSS93MM gas checks are recommended.
***Uses Saeco Cast Bullet Mold Handles ***
***Uses Saeco Cast Bullet Mold Handles ***
| .368" 270 Grain Gas Check 2-Cavity Bullet Mould |
Write Your Own Review